Type B – Double Wall Section – How to Order

Choose your options to configure your part number

Guard Type (Type)
connection on non-foot end (connection)
panel material (panel)
foot type (foot)
Assembled or kit (assembly)
A - Assembled (Factory Assembles)
K - Kit (Customer Assembles)

Ready to Configure Your Guarding Section?

With our online configurator you can generate a solid model and part number for your guarding section.

Have a Custom Quote or Need Help with Your Application?

Our experienced technitions can help assist you with you needs.

Copyright 2024 Modular Guarding Solutions.  All Rights Reserved

B1 - Single Leg on Left
B2 - Single Leg on Right
B2 - Single Leg on Right
B4 - No Legs
B5 - Leg on Left & Center
B6 - Leg on Right & Center
B7 - 1 Leg in Center
B8 - 3 Legs
Height of Guard in mm
Measure from Bottom of Foot to Top of Guard
Max Panel Height = 2400mm
Width of Guard in mm
Max Width is 1200 mm
Measure from Outside Edge to Outside Egde
Sweep of Guard (mm)
Measured from Bottom of Foot to the Bottom of the Guard
Sweep = Height - Panel Height
T - Tie Plates Top, Angle at Bottom
(Tie Plate Good for Straight Connection)
P - Tie Plates Top & Bottom
(Good for Adding a Panel to a Fence Section)
A - 45 Degree Angle on Top and Bottom
(Angle good for 90 Degree Wall Connections)
H - Hinge
(Hinge Good for Odd Angle Connection)
Z - No Connection (Std on B3 & B8)
Y - Yellow Insert
O - Orange Insert
Z - None
Powder Coated Extrusion Available on Request
Z - No Connection (Std on A4)
P - 1/4 Inch Polycarbonate
B - White - PVC Board
C - Blue - PVC Board
E - Black - PVC Board
J - Grey - PVC Board
C - 0.090 Aluminum Panel - Not Coated
L - Aluminum Composite Panel
R - No Panel W/ Retainer Insert (Thin)
N - No Mesh W/ Retainer Insert (Thick)
Z - No Panel
Other Panels, Mesh, & Colors Available Upon Request
F - 4 Sided Foot (Min Sweep/>150mm)
T - 3 Sided Foot (Can Be Adjusted at Install)
P - 2 Inch Pad and Angle Bar
A - Single Small Angle (45 x 90)
Z - No Foot