CAD Configurator

Choose from the following Guarding Sections to create your CAD Models

  • Pick and Choose Leg Options
  • Max Width = 1200mm
  • Max Height (Less Sweep) = 2400mm
  • Pick and Choose Leg Options
  • Max Width = 2400mm
  • Max Height (less sweep) = 2400mm
  • Panel Widths Can Be Different From One Another
  • Max Width = 1200mm Per Wall
  • Max Height (less sweep) = 2400mm
  • Commonly Used on Corners Near Openings and Doors
  • Dog Houses are Commonly Added to Openings in the Fence Over a Conveyor
  • Typically Used to Prevent People from Reaching Dangerous Spots
  • Max Width = 1200mm
  • Max Height = 2400mm
  • Allows for Easy Access Without a Door or Disassembling the Guard
  • Max Width = 1200mm (single) /2400mm (double)
  • Max Height (less sweep) = 2400mm
  • Other Locking Options Available Upon Request
  • Wings are Used When You Need Just a Small Panel Added
  • Most Difficult to Self-Assemble, Panel A Single Wall is a Practical Alternative
  • Max Width = 1200mm
  • Max Height = 2400mm
  • Customer Needs to Install Anti Rattle Insert After Assembly – Shipped Loose
  • Doors Without Frame are Measured by Opening Size
  • Max Width = 1200mm Per Door
  • Max Height (less sweep) = 2400mm
  • No Handle Common with Doors with 3rd Party Handled Interlocks.
  • Sliding Door Uses a Header with a Trolly in Place of a Swing Door
  • Max Width = 1200mm
  • Max Height = 2400mm
  • Trolleys Come with Internal Stops in Track to Prevent Overtravel
  • Doors Without Frame are Measured by Opening Size
  • Max Width = 1200mm (Single Panel Door) 2400mm (double panel door) Per Door
  • Max Height (less sweep) = 2400mm
  • Drop Cane Comes Standard on Left Door, and Latching Handle on Right (field switchable)
  • Double Doors and Header Less Doors Come with Casters (standard)
  • Vertical Post and a Foot
  • No End Cap (standard)

Bar

  • Horizontal Bar for Going Between Two Posts (of Guard Sections)
  • No End Cap (standard)

Half Strap

  • Vertical Strap for Going Between Two Bars  (or Guard Sections)
  • No End Cap (standard)

Generate Your Own Sectional Guarding CAD Files. It's Easy & Free.

Click on the Section Type you need to try it out.

Contact

Need a custom quote?

MGS has knowledgeable staff ready to help you with your application.




    Copyright 2024 Modular Guarding Solutions.  All Rights Reserved